Shop
-
1-AVC See-Thru Air Vent
A See-Thru Body – So You’ll Know When It’s Working Now, you can literally see what you’ve been missing –…
-
1/2/3/6 LD series free-floating guided lever drain traps
Armstrong’s cast iron, free-floating guided lever drain traps use the same bodies, caps, lever mechanisms, valves and seats of Armstrong…
-
1000 series inverted bucket steam traps
-
11/22/13 LD series free-floating guided lever drain traps
Armstrong’s stainless steel, free-floating guided lever drain traps use the same bodies, caps, lever mechanisms, valves and seats as Armstrong…
-
180 LD series free-floating guided lever drain traps
All-stainless steel for horizontal installation.
-
1800 series inverted bucket steam traps
A quick and easy “in-line” replacement for other types of side inlet/side outlet traps, the Armstrong 1800 Series brings together…
-
200 series inverted bucket steam traps
The most reliable steam trap known-the inverted bucket-provides efficient condensate drainage of virtually all types of steam-using equipment.
-
2000 series inverted bucket steam traps
With the 2000 Series’ 360° universal connector, you can install inverted bucket efficiency and long service life in any piping…
-
300 series inverted bucket steam trap
Armstrong offers its 300 series forged carbon steel traps for vertical installation with a choice of screwed, socketweld or flanged…
-
32/33/36-LD series free-floating guided lever drain traps
Armstrong’s forged steel free-floating guided lever drain traps use the same bodies, caps, lever mechanisms, valves and seats as Armstrong…
-
400 series inverted bucket steam traps
Armstrong offers its 400 Series forged chrome-moly steel inverted bucket traps for vertical installation with a choice of screwed, socketweld…
-
4000 series inverted bucket steam traps
With the 4000 Series IS-4 connector, you can install 4-bolt compatible inverted bucket efficiency and long service life in any…
-
401-SH/501-SH series inverted bucket superheat steam traps
Armstrong’s 401-SH/501-SH Series inverted bucket superheat trap line is made for overcoming the difficult combination of superheat and high pressure/low…
-
5000 series inverted bucket steam traps
Armstrong offers its 5000 Series forged chrome-moly steel traps for vertical installation with a choice of screwed, socketweld or flanged…
-
521 series inverted bucket steam trap
Armstrong Model 521 horizontal installation offer smaller capacities at higher pressures.
-
6000 series inverted bucket steam traps
Armstrong offers its 6000 Series forged chrome-moly steel traps for vertical installation with a choice of screwed (up to 900…
-
71 series snap action ball float drain traps
Armstrong’s line of snap action drain traps includes two basic models available in cast iron and forged steel. The floats…
-
800-813 series inverted bucket steam traps
The most reliable steam trap known-the inverted bucket-provides efficient condensate drainage of virtually all types of steam-using equipment
-
814-816 series inverted bucket steam traps
The most reliable steam trap known—the inverted bucket—provides efficient condensate drainage of virtually all types of steam-using equipment.
-
880 series inverted bucket steam traps
-
970 series inverted bucket steam traps
Armstrong offers two sizes of cast steel inverted bucket traps with in-line horizontal pipe connections and integral strainers with a…
-
995LD-DSS series free-floating guided lever drain traps
Armstrong’s duplex stainless steel free-floating guided lever drain trap use the same lever mechanisms, valves and seats of Armstrong inverted…
-
A series float and thermostatic steam traps
Armstrong A & AI Series F&T traps are for industrial service from 0 to 175 psig (12 bar) and feature…
-
AB series – Standard electric actuators
Actuators for on-off (S2) and modulating (S4) control
-
AB-3000 series
Armstrong’s AB-3000 Bimetallic Steam Trap operates by the effect that rising temperature has on bimetallic elements. It adjusts itself to…
-
AB-3500 series
Armstrong’s AB-3500 Bimetallic Steam Trap operates by the effect that rising temperature has on bimetallic elements. It adjusts itself to…
-
Adams Butterfly Valves for LPG/LNG
Triple eccentric butterfly valves in Flanged / butt weld / side entry design. Used for applications in LNG plants, LNG…
-
Adams HTK series
The strength of HTK valves is their absolute tightness at temperatures up to 950 °C.
-
Adams MAK series
The MAK can be used for a broad range of temperatures and pressures.
-
AIC series float and thermostatic steam traps
Armstrong AIC Series F&T traps are designed for industrial service from 0 to 465 psig (32 barg). They feature all…
-
Anson Flow basket strainer
Designed for long service under high temperature or corrosive fluids.
-
Arflu Check Valve
Check valves are automatic valves, which have safety applications to prevent flow returns and reduce water hammer. When the pump…
-
Arflu dual expanding plug valves double block and bleed
The Dual Expanding Plug valves produce a watertight closure both upstream and downstream, being used in different sectors
-
Arflu gate valve
Gate valves can be used in many applications. They allow the fluid to flow in a fully open position and…
-
Arflu globe control valve
ARFLU Globe Control Valves have been designed for sizes up to 26″ and pressures up to class 2500, depending on…
-
Arflu globe valve
Because of their configuration, golbe valves are perfect for regulating or limiting fluid.
-
Arflu Nozzle Check Valve
Arflu Nozzle check valves have been designed to provide reliable backflow prevention for the Petrochemical, Gas & Water divisions.
-
Arflu SWRO plug valves
The most common applications are: Insulation (On /Off), CIP (on-site cleaning) and Control valves.
-
Arflu through conduit gate valve
Through Conduit gate valves can be used in many applications. They allow the fluid to flow in a fully open…
-
Armstrong Piston Valves
Armstrong Piston Valves are full port forged steel isolation valves with a maximum operating pressure of 136 Barg/1973 psig and…
-
Armstrong Stainless Steel Thermostatic Air Vents AV-348
Armstrong supplies thermostatic air vents for the positive venting of air and other non-condensable gases from steam in chamber-type heat…
-
AV-11 / AV-13 Air Vents
The AV-11 and AV-13 air valves are designed for the removal of air and other gases from hydronic heating and…
-
Axial disc check valve
Axial disc check valve for pumping stations and networks for clean water distribution, irrigation and water treatment
-
B series float and thermostatic steam traps
Armstrong B and BI Series F&T traps combine high standards of performance and long life with economy. They are ideal…
-
Ball check valves
Check valve for pumping stations for clean, sewage water and loaded or viscous fluids.
-
Berluto Float valves
Our float valves are regulating inflow and level reliably without any auxiliary power or sensitive sensors.
-
Besa safety valves
Besa designs and produces safety valves to discharge gases and liquids.
-
BFE globe valves
Globe valves are used for flow regulation, frequent operation, increased flow resistance or for positive shut off when closed.
-
BFE swing check valves
Swing check valves, like all check valves, are used to prevent back flow in the line. The pressure of the…
-
Blowdown valves for steam boilers
Blowdown valves for bleeding dirt and sludge for steam boilers – model 460
-
Broady Cryogenic Safety Valves
API520 / 527 and DNV, BV and ABS Type approved for pressure vessels and LPG/LNG cryogenic applications
-
BSP / NPT threaded lift check valves
3 piece spring check valves from stock in either threaded / socket / butt weld version.
-
BVSW series inverted bucket liquid drainers
Armstrong inverted bucket drain traps are designed for systems where heavy oil and dirt may be encountered.
-
CD-33 series disc steam trap
The Armstrong CD-33 is a disc-style trap designed to control the trap’s cycle rate. By reducing the cycle rate, the…
-
CD-3300 series disc steam trap
The Armstrong CD-3300 is a three-discharge port design, which provides stable disc operation to extend operating life.
-
CD-40 and CD-60 series controlled disc steam traps
-
CD-4080 series high pressure disc steam trap
The CD-4080 is a durable disc style steam trap designed for high-pressure use. The CD-4080 is engineered to meet the…
-
CD-72SR series disc steam trap
The Armstrong CD-72SR is a disc style trap designed to control the trap’s cycle rate. By reducing the cycle rate,…
-
CD-80S series disc steam trap
Armstrong’s CD-80S series disc-style steam traps are designed for medium to high-pressure use. The CD-80S series was engineered to meet…
-
CDB UL Strainer
CDB’s UL Strainers are designed for pipeline in fire protection service.
-
CDB Activated Carbon Filters
Activated Carbon are used for the specific removal of contaminants exploiting their absorbing power
-
CDB Cartridge Filters
Cartridge filter elements are the most suitable solutions for filtration efficiencies up to 0.1 microns.
-
CDB Conical temporary type
CDB Conical temporary type strainers are designed for the efficient removal of solids in new pipeline start up and commissioning.
-
CDB Double Block & Bleed Expanding Plug Valve
The Double Block & Bleed (DBB) Expanding Plug Valve was developed as an alternative solution to the traditional system made…
-
CDB Lubricated Plug Valves
Lubricated Plug Valves use special grease as lubricant in order to make their operation easier, over a wide range of…
-
CDB Non-Lubricated Plug Valves
Non-Lubricated Plug Valves, also known as Self-Lubricated Plug Valves, are designed to reduce the friction between the plug and the…
-
CDB Self-Cleaning Filters
Self-cleaning filters are the solution to operate continuously also with high TSS values in the feed.
-
CDB Sight Glasses
-
CDB Simplex and Duplex Basket
CDB manufactures both cast steel and welded fabricated basket strainer. CDB strainers meet customers’ expectations and the highest standards.
-
CDB Tee Type Strainer
Fabricated Tee type strainers are commonly used in the oil & gas field and are often preferred to cast steel…
-
CDB Y Type Strainer
CDB Y type strainers, most probably the largest range on the market, are designed and manufactured to comply with any…
-
Clorius 2 – WAY CONTROL VALVES H2F – DN100-150
Control valves type H2F are designed for use in regulating high pressure hot water, steam and heat transfer oil.